Wood Filler is a special product with low aromatic solvent used for the medium coating of materials mainly based on nitrocellulose, alkyd resin, plasticizer, special pigment, and transparent filler for good sanding property. With excellent workability, strong adhesion and thick film, this product is specially formulated for interior wood filler on wooden surface.
Appearance : Transparent
Solubility : Soluble in Water
Solid content : 66 ± 2 %
Specific gravity : 1.46 ± 0.05 gr/cc
Viscosity : 300 ± 2 poise
– HEALTH EFFECTS
Irritating to eyes, respiratory system and skin. May cause sensitivity by skin contact.
– ENVIRONMENTAL EFFECT
On the basis of available information, this product is not expected to produce any significant adverse environmental effect when recommended use instruction are followed.
– FIRE HAZARDS
First Aid Measures
Remove affected person to fresh air and keep at rest. If breathing is irregularly or stopped, administer artificial respiration. Obtain medical advice immediately.
– EYE CONTACT
Remove contact lenses. Flush eyes with clear running water for 15 minutes while holding eyelids open; if irritation persists, seek medical attention.
– SKIN CONTACT
Remove contaminated clothing. Wash skin thoroughly with soap and water. Do not use solvents or thinner. If irritation persists, seek medical attention.
Give two glasses of water for dilution; seek medical attention.
Fire Fighting Measures
– EXTINGUISHING MEDIA
Carbon dioxide, water fog, dry chemical, chemical foam.
– FIRE FIGHTING PROCEDURES
Self – contained respiratory equipment; cool containers to prevent pressure buildup and explosion when exposed to extreme heat.
– HAZARDOUS COMBUSTION PRODUCTS
Smoke, fumes, oxides of carbon.
Accidental Release Measures
STEP TO BE TAKEN IN CASE MATERIAL IS RELEASE OR SPILLED: CAUTION – FLAMMABLE – Evacuate and ventilate area; confine and absorb into absorbent; place material into approved containers for disposal; do not discharge into lakes, ponds, streams, or public waters.
Handling and Storage
The product should be handled in a well – ventilated area. Keep container tightly closed. Isolated from sources of heat, sparks and open flame. Smoking, eating and drinking should be prohibited in application area. For personal protection see section 8. Never use pressure to empty: container is not a pressure vessel.
Storage in closed container away from sources of heat in a well ventilated area.
– RESPIRATORY PROTECTION
Wear suitable respiratory protection if exposure limits maybe exceeded. Airline respirator or cartridge respirator with appropriate filter.
– HAND PROTECTION
Wear impermeable gloves.
– EYE PROTECTION
Use safety eye wear designed to protect against splash of liquid (goggles)
– SKIN PROTECTION
Wear suitable protective clothing.
Stability and Reactivity
This preparation contains materials which are unstable under following condition ; exposure to heat (above 40 °C), strong UV-sources, free radical initiators, peroxides, strong alkalis or reactive metals. These could cause the product to polymerise exothermially. Unintentional contact with them should be avoid.
Acute oral toxicity : N/A
Irritant effect to skin : N/A
Irritant effect to eyes : Irritant
There is no data available on the preparation it self. Based on the chemical composition of the product is assumed that the mixture can be treated in an acclimated biological waste treatment plant system in limited quantities. However, such treatment should be evaluated and approved for each specific biological system. None of the ingredients in the mixture are classified as Marine Pollutant.
Do not allow drains of water courses. Wastes and emptied containers should be disposed of according to local regulation. Do not flush to sanitary sewer or waterway.
Road transport ADR/ RID : Non-hazardous goods
Marine transport : Non-hazardous goods
Air transport : Non-hazardous goods
Hazards warning labeling not compulsory
This information is based on our present states knowledge. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application.