Melamine Sanding Sealer


Melamine Sanding Sealer Ichiban is a product with two component paint consist of amino and alkyd resin, suitable for sanding and filler. This product has thick film transparency, good adhesion, dry fast and also suitable for rattan furniture

Product Characteristics

Appearance : Liquid
Color : Tranparant
Solubility : Not Soluble in Water
Solid content : 50 ± 2 %
Specific gravity : 1.02 ± 0.02 gr/cc
Viscosity NK2 : 1’10 sec
Mixing ratio (B : Th) : 9 : 1 : 9
Application Viscosity NK2 : 10 sec
Thinner : Melamine Thinner ST
Hardener : Melamine Hardener RT

Hazard Identification

Irritating to eyes, respiratory system and skin. May cause sensitivity by skin contact.
On the basis of available information, this product is not expected to produce any significant adverse environmental effect when recommended use instruction are followed.
Flammable liquid.

First Aid Measures

Remove affected person to fresh air and keep at rest. If breathing is irregularly or stopped, administer artificial respiration. Obtain medical advice immediately.
Remove contact lenses. Flush eyes with clear running water for 15 minutes while holding eyelids open; if irritation persists, seek medical attention.
Remove contaminated clothing. Wash skin thoroughly with soap and water. Do not use solvents or thinner. If irritation persists, seek medical attention.
Give two glasses of water for dilution; seek medical attention.

Fire Fighting Measures

Carbon dioxide, water fog, dry chemical, chemical foam.
Self – contained respiratory equipment; cool containers to prevent pressure buildup and explosion when exposed to extreme heat.
Smoke, fumes, oxides of carbon.

Accidental Release Measures

STEP TO BE TAKEN IN CASE MATERIAL IS RELEASE OR SPILLED: CAUTION – FLAMMABLE – Evacuate and ventilate area; confine and absorb into absorbent; place material into approved containers for disposal; do not discharge into lakes, ponds, streams, or public waters.

Handling and Storage

The product should be handled in a well – ventilated area. Keep container tightly closed. Isolated from sources of heat, sparks and open flame. Smoking, eating and drinking should be prohibited in application area. For personal protection see section 8. Never use pressure to empty: container is not a pressure vessel.
Storage in closed container away from sources of heat in a well ventilated area.

Personal Protection

Wear suitable respiratory protection if exposure limits maybe exceeded. Airline respirator or cartridge respirator with appropriate filter.

Wear impermeable gloves.

Use safety eye wear designed to protect against splash of liquid (goggles)

Wear suitable protective clothing.

Stability and Reactivity

This preparation contains materials which are unstable under following condition ; exposure to heat (above 40 °C), strong UV-sources, free radical initiators, peroxides, strong alkalis or reactive metals. These could cause the product to polymerise exothermially. Unintentional contact with them should be avoid.

Toxicology Information

Acute oral toxicity : N/A
Irritant effect to skin : N/A
Irritant effect to eyes : Irritant

Ecological Information

There is no data available on the preparation it self. Based on the chemical composition of the product is assumed that the mixture can be treated in an acclimated biological waste treatment plant system in limited quantities. However, such treatment should be evaluated and approved for each specific biological system. None of the ingredients in the mixture are classified as Marine Pollutant.

Disposal Considerations

Do not allow drains of water courses. Wastes and emptied containers should be disposed of according to local regulation. Do not flush to sanitary sewer or waterway.

Transport Information

Road transport ADR/ RID : Non-hazardous goods
Marine transport : Non-hazardous goods
Air transport : Non-hazardous goods

Regulatory Information

Hazards warning labeling not compulsory

Other Information

This information is based on our present states knowledge. It should not therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application.